RubberCoat Liquid Rubber Roof Coating

RubberCoat is a single component, liquid applied waterproof coating combining bitumen with polymer technology to form a high performance elastomeric waterproof membrane. A high quality, all purpose product that can be used on your most difficult waterproofing projects. 

Applied by brush, roller or spray RubberCoat is pre-mixed and ready to be used over many existing surfaces including concrete, wood, masonry brick, metal etc to provide a fully adhered membrane. Containing no solvents or VOCs, RubberCoat is non-flammable and not affected by sunlight.

Typical applications include flat roofs, foundation walls, gutters, vents, ponds, ICFs, car washs, balconies, flashings, curbs, skylights and much much more.

Surface must be clean and dry, stable and free from spalling, efflorescence, dust, dirt, oils, surface flaking, poorly bonded or glossy paint, sealers, salts and other contaminates which may affect adhesion and product performance.

Ambient temperatures should not be less than 5 C and should not exceed 35C during application and for a continuous period of at least 24 hours after application. Avoid hot, direct sunlight. Do not apply over coal tar, avoid solvents and solvent type adhesives. Typical coverage ranges from 15 20 sq.ft / 3.78ltr.

Applying product too thick - May cause cracking and skinning over uncured product. 

Inadequate surface preparation May cause adhesion issues. 

Applying over saturated materials May cause blisters from water vapours.

More product can always be applied on itself. Better to do more coats to build thickness then 1 thick coat.

Wear disposable gloves to help with clean up. Cover or leave brush in pail to avoid air curing the product if you want to use again.