MAPETHERM AR1 GG - One component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems
Mapetherm AR1 GG is a grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories. When mixed with water, it forms a mortar with the following characteristics:
- low viscosity and, therefore, good workability;
- high thixotropic consistency: Mapetherm AR1 GG may be applied on vertical surfaces without running and without the risk of insulating panels slipping, including large sized panels;
- bonds perfectly to all materials normally used in the building industry;
- hardens without shrinking.
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Mapei is consulted before specifying.
Technical
|
||
| Application Temperature (?) | 5 - 40 °C | |
| Capillary Water Absorption (?) | W2 | |
| Compressive Strength (?) | 6 N/mm2 | |
| Flexural Strength (?) | 3 N/mm2 | |
| Modulus of Elasticity (?) | 5500 N/mm2 | |
| pH (?) | 13 pH | |
| Thermal Conductivity (?) | 0.32 W/mK | |
| Working Temperature (?) | -30 - 90 °C | |
Certifications & Ratings
|
||
| CE Marking (?) | ||
| Certifications (?) | BBA | |
Commercial
|
||
| Application (?) | Brickwork , Concrete , Concrete Blocks , Render Boards | |
Materials & Finishes
|
||
| Colour (?) | Grey , White | |
Physical Properties
|
||
| Pot Life at 20°C (?) | 3 hrs at 20°C | |
Other
|
||
| Uniclass (?) | Pr_20_31_53 Mortars and grouts | |
Contact
Contact
Contact