ResoTherm Chip R - CNC routed UFH chipboard system
Resonate's ResoTherm Chip R are a range of CNC grooved chipboards suitable for underfloor heating applications. The high-performance boards are available in 1200mm and 2400mm lengths and can be bonded to with a layer of insulation or finished with a foil facing depending on your project requirements.
Cost Effective Underfloor Heating
ResoTherm Chip R boards provide extremely efficient and high performance underfloor heating for building occupants. They are ideal for all types of developments including residential, care homes and offices.
This system is ideal for replacing existing floor boarding on timber joisted floors as it has minimal impact on floor heights. The system is finished off with our 6mm ResoBacker (fibre cement) cover board, available plain or with pipe layout printed.
The P5 chipboard used to manufacture these panels is FSC certified (FSC-C221537).
Structural Testing
ResoTherm Chip R has been tested in accordance with:
BS EN 1195:1998
BS EN 12871:2013
Ultimate Floor Load, F max = 6.62kN
*Safety factor of 50% should be applied to above value
Testing Parameters
Timber joists = 150mm x 47mm at 600mm centres
ResoTherm Chip R = 22mm thick; 16mm rout at 150mm centres
ResoBACKER = 6mm thick; glued and screw at 150mm centres
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that RESONATE SYSTEMS LTD is consulted before specifying.
Size & Weight
|
||
| Length (?) | 1200 - 2400 mm | |
| Thickness (?) | 22 mm | |
| Width (?) | 600 mm | |
Other
|
||
| Uniclass (?) | Ss_60_40_92 Underfloor heating and cooling systems | |
Technical
|
||
| Compressive Strength (?) | 0.3 - 0.5 N/mm2 | |
| Thermal Conductivity (?) | 0.033 W/mK | |
Commercial
|
||
| Suitable for UFH (?) | ||
Similar Underfloor Heating Products
Contact
Contact
Contact