Siccus Underfloor Heating System
Lightweight design with low height
Uponor Siccus underfloor heating has been developed for use with suspended timber floors. The system is suitable for new constructions as well as for modernising old buildings and results in a minimal construction height of 55 mm. It is quick and clean to fit, and can be walked on immediately after installation. All conventional floor coverings such as tiles, parquet, carpet and plastics with a maximum thermal resistance of R ,B = 0.15 m2K/W, are suitable.
Uponor Siccus comprises just four components; mounting sheet, heat conducting plate, heating pipe and PE foil. It is light in weight: only 25 kg/m2 including the floor load distribution sheet. This is a real engineering bonus, especially for wooden joist constructions. The low-mass floor construction allows fast response temperature controls. The integral pipe guide channels in the Uponor Siccus mounting sheet hold the heat conducting plates and heating pipes. The mounting sheet is flexible to use, easy to cut and pre-fitted with channels in the header area for Uponor PE-Xa and MLC pipes.
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Uponor Ltd is consulted before specifying.
Size & Weight
|
||
| Compatible Pipe Size (mm) (?) | 16 mm | |
| Depth (?) | 30 mm | |
| Foil Thickness (?) | 0.1 mm | |
| Length (?) | 1200 mm | |
| Width (?) | 800 mm | |
Other
|
||
| Uniclass (?) | Ss_60_40_92 Underfloor heating and cooling systems | |
Certifications & Ratings
|
||
| CE Marking (?) | ||
| Standards (?) | EN 13163 , EN 826 | |
Technical
|
||
| Compressive Strength 10% Max Deflection: (?) | 200 kPa | |
| Thermal Conductance at 10°C (?) | 0.033 W/mK | |
Materials & Finishes
|
||
| Material (?) | Expanded polystyrene (EPS) | |
Contact
Contact
Contact